1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again


You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address.

><

1. Klik pada "Start" di pojok kiri bawah layar
2. Klik "Run"
3. Ketik "command" dan tekan ok

Anda sekarang harus pada prompt MSDOS layar.

4. Ketik "ipconfig / release" hanya seperti itu, dan tekan tombol "enter"
5. Ketik "exit" dan meninggalkan prompt
6. Klik kanan pada "Network Places" atau "My Network Places" di desktop Anda.
7. Klik pada "properties"

Anda sekarang harus di layar dengan sesuatu yang berjudul "Local Area Connection", atau sesuatu yang dekat dengan itu, dan, jika Anda memiliki jaringan hooked up, semua jaringan lain.

8. Klik kanan pada "Local Area Connection" dan klik "properties"
9. Double-klik pada "Internet Protocol (TCP / IP)" dari daftar di bawah tab "General"
10. Klik pada "Gunakan alamat IP berikut" di bawah "General" tab
11. Buat sebuah alamat IP (Tidak peduli apa itu. Aku hanya tipe 1 dan 2 sampai i mengisi daerah atas).
12. Tekan "Tab" dan harus secara otomatis mengisi "Subnet Mask" bagian dengan nomor standar.
13. Hit the "Ok" tombol di sini
14. Hit the "Ok" tombol lagi


Anda sekarang harus kembali ke "Local Area Connection" screen.

15. Klik kanan kembali pada "Local Area Connection" dan pergi ke properti lagi.
16. Kembali ke "TCP / IP" Pengaturan
17. Kali ini, pilih "Mendapatkan alamat IP secara otomatis"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" lagi
20. Anda sekarang memiliki alamat IP yang baru

Dengan sedikit latihan, Anda dapat dengan mudah mendapatkan proses ini turun hingga 15 detik.

P.S:
Ini hanya perubahan alamat IP dinamis, bukan ISP / IP address